Fitted sheets on all mattress original product made in USA

How to Use

Cris X Cross With NO LIFTING!

For ALL Mattresses

1. Put fitted sheet on. Lift the corner of the sheet a little, clip suspender strap on the sheet, tuck sheet corner back under.

2. Walk suspender along side of bed, while slipping the strap under the mattress to the opposite front corner, lift corner of sheet a little, clip, tuck back under.

3. Repeat steps 1 & 2 on opposite corners to form an "X". Slides should face foot of bed for adjustments.

*** Baby's Cribs: Adjust length of suspender so that it is at least 5"-6" shorter than the diagonal.

WE ALSO RECOMMEND A SEPARATE SET FOR THE MATTRESS COVER WHICH IS NOT CHANGED AS OFTEN AS THE SHEETS.

CONTACT US: 1-800-446-0241 or Email: sheets@sheetsuspenders.com

Suspenders USA LLC, 1450 Madruga Ave #207, Coral Gables, FL 33146

FOR FILLED WATERBEDS

1. Tuck suspender strap along side of filled waterbed as far as your hand will go, leaving clips at eye view. Repeat on other side.

2. Put fitted sheet on and hook suspender clips to corner of sheet.

AND NOW IN YEAR 2000+

Most sheets these days have too much material that hangs over the sides, making Sheet Suspenders® needed even more. Our new Patent Pending, not only addresses cris X cross, but in addition we recommend that you use another set vertically and another set horizontally.

We also suggest that this same process be used on the mattress cover which is not changed as often as the sheets.

Lift Corners of Sheet Only. Don't Lift Mattress

CHANGING THE SHEETS

1. DO NOT LIFT THE MATTRESS! The weight of the mattress keeps suspender straps in place.

2. Lift four corners of fitted sheet a little, unclip.

3. Put new sheet on and re-clip four corners.